|
|
 |
| |
|
DURATOP UVPL-4006
Clear UV Cure Coating
Technical Data Sheet |
PDF FORMAT |
Description: Zero (0) VOC, Clear decorative topcoat for various plastic substrates.
Application: Roll Coat, Spray, etc.
Substrates: Polystyrene, ABS, Acrylic & other plastics.
Film Build: 0.3 - 2 Mils
UV Care: 50-200 ft/min, H Bulb In and Out of Focus
Clean Up: Acetone, Acetates and etc.
Storage: Product should be stored inside away from heat & light.
Features
Hardness, Durability, Excellent Adhesion, Mar. and Outdoor Weatherability
Properties
| Specific Gravity: |
1.02 ± 0.05 |
| Viscosity #3 Zahn: |
25 ± 2 |
| VOC: |
0 |
| Tape Adhesion: |
5B |
| Gloss @ 60°: |
95-100 |
| Storage Shelf Life: |
Good |
|
SAFE HANDLING PROCEDURES
Avoid contact with skin and eyes. Latex rubber gloves, safety glasses and rubber footwear are
advised when handling this material. In case of contact with skin, wash immediately with water, DO
NOT USE SOLVENTS. In case of eye contact, rinse immediately with after for at least 15 minutes
and seek medical attention.
The above properties of DURAVIN or DURATOP products are based upon tests and data believed to be reliable, since actual use by others is beyond our control, no guarantee, expressed or implied, is made by Thermoclad Company as to the effects of such use or results to be obtained.
|
|
|
|
|
|
|
